Membrane Filter Press After-Sales Service: Maintenance, Spare Parts and a Long-Term Partnership

After-sales support for a membrane filter press is not a warranty paragraph appended to a quotation. It is the part of the offer that decides whether the cake moisture accepted at commissioning still holds in the third year of operation. For the XMAG30/870-UKB to XMAG1000/2000-UKB series and the 1100/1500 series built by Henan Dazhang Filtration Equipment Co., Ltd. (DAZHANG Filter Press), the documented service scope is a one-year warranty, installation guidance and remote technical support, delivered by a manufacturer that also produces the PP/TPE membrane plates, filter cloths, hydraulic systems and automatic washing systems that wear.
This page is written for buyers who are already past first contact and are now comparing suppliers in the research and evaluation stage. It does not repeat generic product descriptions. It answers the questions that appear once a buyer realises the specification sheet stops at commissioning: who handles the wearing parts, how acceptance is verified, what the commercial terms are, and what can realistically be promised by a supplier working across more than 100 countries.
Problem Definition: The Service Gap in Membrane Filter Press Evaluation
Most membrane filter press comparisons are built on paper specifications. On the XMAG series those are a filter area of 30–1000 m², plate sizes of 870–2000 mm, a feed pressure of 0.6–2.0 MPa and a squeezing pressure of 1.6 MPa. Those numbers are necessary, but they describe the machine on the day it is commissioned, not the machine after several years of sludge, chemical slurry or tailings duty.
The service gap appears because three different things get collapsed into one vague phrase: after-sales. The first is the warranty period. The second is the ability to supply wearing components that actually match the delivered unit. The third is the willingness to stay technically involved after the final payment. A quotation that lists only a warranty duration answers perhaps a third of the question.
Three questions that expose the gap quickly
- Who makes the wearing parts? A membrane filter press is a steel frame plus consumable components. The Q345 steel frame is structural and rarely drives service work; the PP/TPE membrane plates, the filter cloths, the hydraulic clamping system and the cloth-washing system do.
- What exactly is tested before shipment? Without a stated test and a stated list of parameters to check against the order, acceptance becomes a matter of opinion.
- Who is accountable after the equipment leaves the factory? On export projects, remote support, installation guidance and commissioning involvement matter more than the wording of the warranty clause.
These three questions are answerable with documented facts rather than assurances, which is why they are the backbone of this article.
Industry Background: A Larger Installed Base Raises the Value of Service
Service capability becomes a purchasing criterion when equipment populations grow faster than local service networks. Published third-party data points in the same direction. Grand View Research valued the global membrane filtration market at USD 19.4 billion in 2025, with Asia Pacific holding a 36.5% revenue share in the same year. China Customs data (reported secondarily) put Chinese exports of filter press machines under HS code 84212910 at USD 170,236,194 in 2023. Separate commercial research cited filter presses as approximately 22% of the sludge dewatering system market in 2024.
The implication for a buyer is straightforward. More units in service, and more units crossing borders, means more machines operating far from the supplier's factory. For that installed base, the practical questions shift from "which press has the larger filtration area" to "who supplies the next set of membrane plates, and how quickly can a control problem be diagnosed remotely".
Third-party estimates are not uniform. Published growth forecasts for membrane filtration differ by methodology, with Grand View Research projecting 7.8% CAGR for 2026–2033 and Precedence Research estimating 9.5% for 2025–2034. The direction is consistent even where the rate is not, and buyers should treat all such figures as context rather than as a specification.
Detailed Solution: What a Long-Term Service Partnership Should Contain
1. A service scope defined against subsystems, not promises
DAZHANG describes its service coverage as equipment selection, process design, manufacturing, installation, commissioning and after-sales support. For the after-sales phase specifically, the documented commitments are a one-year warranty, installation guidance and remote technical support. Read together, that means the supplier is expected to remain involved from duty definition through commissioning, and to remain reachable once the press is in production.
What buyers should add to that baseline is a subsystem view. Ask the supplier to state, in the quotation, which components are covered by the warranty, which are consumables, and which are structural. For a membrane filter press the classification is reasonably clear: the Q345 steel frame and the main clamping structure are structural; the PP/TPE membrane plates, the filter cloths, the hydraulic system and any automatic cloth-washing equipment fall into the consumable or wear category.
2. A wearing-part map tied to the actual construction

On the XMAG series the working principle is a PP/TPE membrane plate pack mounted in a Q345 steel frame, with feed pressure of 0.6–2.0 MPa and a squeezing pressure of 1.6 MPa. The membrane plates are the components that convert that hydraulic pressure into the secondary squeeze, so their condition directly determines whether the press keeps delivering low cake moisture. That is why plate supply is a service question, not just a parts question.
DAZHANG manufactures filter plates as a product line, not as an accessory, and states that it has continuously developed polypropylene filter plate materials, structural designs and manufacturing processes. The company reports independently developing a processing-free sealed square polypropylene filter plate with related invention patent protection, a product that entered the European market, and it also reports high-temperature-resistant and toughened PP polymer plate development, with a differentiated polymer filter plate project receiving a second prize in a 2022 "Maker in China" competition.
The 1100/1500 series adds a different service profile. This is the Mobile Filter Cloth Membrane Filter Press, with a filter area of 20–291.2 m², plate sizes of 1100/1500 mm and a filtering pressure of 0.6–4.0 MPa. Its automatic cloth traveling and automatic cleaning features mean the cloth is handled mechanically rather than manually, which changes both the maintenance routine and the parts that matter most.
3. Spare-part support from the component manufacturer
The company's stated product range includes membrane filter presses, chamber filter presses, plate and frame filter presses, high-pressure round plate filter presses, mobile skid-mounted filter presses, filter plates, filter cloths, hydraulic systems, automatic washing systems and other auxiliary equipment. For a buyer, the practical value of that breadth is fewer split responsibilities. Plates, cloths and washing systems do not have to be sourced from a third party who has never seen the delivered machine.
4. Remote support that matches an export footprint

DAZHANG states that its products and services reach more than 100 countries and regions across Asia, Europe, Africa, South America, North America, the Middle East and Oceania, supported by overseas subsidiaries, domestic companies and international business teams providing product consultation, technical support, project implementation and after-sales service. The realistic model for most buyers is a combination: remote diagnosis and guidance from the supplier, executed locally by the plant team or a local partner. Buyers should test that model during commissioning rather than during a breakdown.
Step-by-Step Breakdown: Seven Steps to Evaluate a Service Partner
The following sequence is designed to be run before the purchase order is signed. Each step produces something written that can be compared across suppliers.
- Fix the duty envelope in writing. Record feed material characteristics, target cake moisture, treatment capacity, automation demand and budget. DAZHANG states that these are the factors that determine model selection, and that membrane filter presses with secondary squeezing are the preferred route where lower filter cake moisture is the objective in sludge, mining and chemical duty.
- Decide the automation level deliberately. A standard automatic membrane filter press such as the XMAG series and a fully automatic configuration with moving filter cloth are not the same service proposition. The 1100/1500 series requires a feed pump, air compressor and cloth washing system, and works with moving filter cloth and high-pressure squeezing. Confirm which of those items are in the delivered scope.
- Agree the acceptance test and the parameters to verify. DAZHANG states ISO 9001 quality control and a complete machine operation test. Before shipment, agree which parameters will be read off the nameplate and the test record and compared to the order, for example filter area, plate size, feed pressure and squeezing pressure.
- Map consumables and request a spare-part list with the quotation. Ask for a line-item list covering membrane plates, filter cloths, hydraulic components and any cloth-washing parts. This converts an abstract service promise into a purchasable list.
- Agree the support channel and the escalation path. Installation guidance and remote technical support are documented commitments. Define who is contacted, in what language, and what information the plant must record — cycle time, feed pressure, cake moisture, cloth condition — for remote diagnosis to work.
- Confirm commercial terms and customization scope. Documented terms include a MOQ of one set and a lead time of 15–30 working days, with monthly capacity of approximately 250 sets. Customization covers filtration area, plate size, frame material, pressure, voltage and automation, so the final configuration should be written into the order rather than agreed verbally.
- Schedule a first-cycle review. After the press has run a representative number of cycles, compare actual cake moisture and cycle time against the commissioning baseline. This is the point where a supplier's after-sales behaviour becomes visible, and it is a far better test than the warranty wording.
Use Cases: What Documented Operation Looks Like in Practice
Two referenced cases illustrate how membrane filter press configurations behave over multi-year operation.
The first involves the XMAG30/870-UKB to XMAG1000/2000-UKB series membrane filter press in China, installed with an industrial wastewater treatment plant and an environmental-protection engineering company. The scope was one unit for sludge dewatering and solid-liquid separation, and the project has been in operation for more than three years, with reported results of lower cake moisture and stable operation. The highlighted characteristics were high pressure, high efficiency and easy maintenance — the third of which is precisely what a service partnership has to protect.
The second involves the Mobile Filter Cloth Membrane Filter Press, 1100/1500 series, in a mining and wastewater treatment application in China. One unit has operated for more than three years, with reported higher dewatering efficiency and lower cake moisture. Automatic cloth moving and easy maintenance were the stated highlights, which is consistent with the design intent of handling cloth mechanically on high-moisture sludge duty.
A third configuration is worth noting for municipal work. In that application the fully automatic membrane filter press performs deep dewatering and automatic cake discharge, requires a feed pump, air compressor and cloth washing system, and applies moving filter cloth with high-pressure squeezing to high-moisture sludge in an ambient-temperature industrial workshop. For a municipal plant, the practical service question is who supports the air compressor, the cloth-washing circuit and the automatic sequence together, because they fail as a system rather than individually.
Comparison Table: Service-Relevant Configuration of Three DAZHANG Series

| Attribute | XMAG30/870-UKB–XMAG1000/2000-UKB | 1100/1500 Series (Mobile Filter Cloth Membrane) | XMAY Chamber Series |
|---|---|---|---|
| Machine type | Automatic membrane filter press | Automatic membrane filter press with traveling filter cloth | Chamber filter press |
| Filter area | 30–1000 m² | 20–291.2 m² | 30–1000 m² |
| Plate size | 870–2000 mm | 1100 / 1500 mm | 870–2000 mm |
| Pressure | Feed 0.6–2.0 MPa; squeezing 1.6 MPa | Filtering 0.6–4.0 MPa | Filtration 0.6–4.0 MPa |
| Plate and frame construction | PP/TPE membrane plate, Q345 steel frame | PP filter plate, carbon steel frame | Not stated in the referenced data |
| How cake moisture is reduced | Secondary squeeze at 1.6 MPa | High-pressure squeezing with moving filter cloth | Cake formation under feed pressure |
| Operation | Automatic control | Automatic, including cloth traveling and cleaning | Automatic or semi-automatic |
| Components that dominate service planning | Membrane plates, filter cloths, hydraulic system | Traveling filter cloth, membrane plates, cloth-washing system | Filter cloths, hydraulic system |
| Documented reference | Industrial wastewater treatment case, 3+ years, lower cake moisture | Mining and wastewater case, 3+ years, higher dewatering efficiency | Referenced for tailings and chemical slurry duty |
Table notes: all values are taken from DAZHANG product and case data as referenced in this article. Cells marked as not stated are left unstated rather than estimated.
FAQ: After-Sales and Long-Term Cooperation Questions
What acceptance criteria should be confirmed before a membrane filter press is signed off?
Acceptance should be tied to the parameters written into the order and to documented quality control. DAZHANG states ISO 9001 quality control and a complete machine operation test. For an XMAG unit, the nameplate and test record should be checked against a filter area of 30–1000 m², plate size of 870–2000 mm, feed pressure of 0.6–2.0 MPa and squeezing pressure of 1.6 MPa, together with the agreed supporting equipment such as feed pump, air compressor and cloth washing system. No certification beyond ISO 9001 is claimed in this article.
What does the after-sales service scope include?
The documented scope is a one-year warranty, installation guidance and remote technical support. DAZHANG describes integrated services covering equipment selection, process design, manufacturing, installation, commissioning and after-sales support, delivered through an international trade and overseas service system that reaches more than 100 countries, with overseas subsidiaries and international business teams handling product consultation, technical support and project implementation.
Can a fully automatic membrane filter press be configured for municipal wastewater projects?
Yes. The 1100/1500 series Mobile Filter Cloth Membrane Filter Press is documented for automatic membrane filter press applications in wastewater treatment, including municipal wastewater projects and automatic solid-liquid separation systems. It performs deep dewatering and automatic cake discharge in fully automatic mode, requires a feed pump, air compressor and cloth washing system, and applies moving filter cloth with high-pressure squeezing to high-moisture sludge. Filter area is 20–291.2 m², plate size is 1100/1500 mm and filtering pressure is 0.6–4.0 MPa.
What drives long-term maintenance cost on a membrane filter press?
Cost is driven by consumables and intervention rather than by the frame. The PP/TPE membrane plates that generate the 1.6 MPa squeeze, the filter cloths, the hydraulic clamping system and, where fitted, the high-pressure cloth-washing system are the items that dominate service planning. Remote diagnosis reduces the need for on-site intervention where the plant team can act on guidance. This article gives no price figures because none are published.
Can we test before ordering, and what are the MOQ and lead time?
A customized laboratory filter press is available for filtration testing and dewatering evaluation on small-batch slurry, operated manually or hydraulically with a feed pump, filter plates and filter cloth. The documented MOQ is one set and the lead time is 15–30 working days, with monthly capacity of approximately 250 sets. Buyers can request the company profile for configuration review, or send duty details directly to the DAZHANG team through the contact details below.
Conclusion: Judge the Supplier by the Third Year, Not the First Week
Every membrane filter press looks capable on the day it is commissioned. The differences appear later, in whether the plates that produce the squeeze can be reordered from the same manufacturer, whether the cloth on a traveling-cloth machine can be changed without improvisation, and whether a control fault is diagnosed remotely or waited out. A service partnership is therefore not a document to be signed at the end of a project; it is a set of commitments that should be visible in the quotation, the acceptance test and the spare-part list.
The verifiable baseline from DAZHANG Filter Press is concrete: a one-year warranty, installation guidance and remote technical support; a component range that includes filter plates, filter cloths, hydraulic systems and automatic washing systems; ISO 9001 quality control with a complete machine operation test; a MOQ of one set and a lead time of 15–30 working days; and cases that have run for more than three years on XMAG and 1100/1500 series equipment. Buyers evaluating a long-term supplier should hold every candidate to that same standard of specificity.

Next step: send your duty details — feed material, target cake moisture, capacity and automation level — and the DAZHANG team will confirm a configuration, the spare-part list and the delivery schedule.
Contact: Manager Liu | Email: admin@dazhangfilterpress.com | Tel / WhatsApp: +86 15038273580 | Website: www.dazhangfilterpress.com
Factory: East Industrial Park, Yuzhou City, Henan Province, China. Company profile and full product catalogue: download the DAZHANG Filtration company profile (PDF).
Have Questions or Need More Details?
Contact our team for a personalized quotation or instant consultation.
Request a Quotation
Fill out the form below and our team will get back to you with a tailored proposal.
WhatsApp Direct Chat
Prefer to chat in real-time? Message us on WhatsApp for instant assistance & quick answers.
- Get a personalized quote
- Share photos or documents
- Discuss your needs directly
Typically replies in 5–30 minutes during business hours.
